|
|
| |
SD360
Wireless Ceiling-Mounted Smoke Detector (made by Everday)
|
Main Features*
|
|
|
|
One high-sensitivity photoelectric smoke sensor
|
|
|
Test/Mute button
|
|
|
LED operation indicator
|
|
|
Battery operated
|
|
|
Built-in siren (85dB at 3m)
|
|
|
Available in 433MHz or 868Mhz (868Mhz RF not yet certified)
|
|
|
ETL/ETLc certification at 433Mhz only
|
|
* To comply with ETL/ETLc, SD360 must be installed with SP6000
|
|
|
|
|
| |
G550
Wireless Glassbreak Detector
|
Features
|
|
|
|
Modern & sleek design
|
|
|
Supervised wireless detector offered in 433 MHz and 868 MHz
|
|
|
Six meter (20 ft.) radius range and 360 degrees coverage pattern protects an entire room with one sensor
|
|
|
Detect breaking of different types of glass including plate, tampered, laminated and wired
|
|
|
Standard Alkaline 3x AAA type battery with low battery supervision
|
|
|
Factory-set sensitivity for safer installation
|
|
|
Recognizes actual pattern of breaking glass across the full audio band
|
|
|
Impact and shock wave analysis
|
|
|
High-immunity to RFI and EMI signals
|
|
|
Hand-held tester available separately
|
|
|
|
|
| |
5709C
Acoustic Glass Break Sensor Tester
| Features |
|
For use with the G550 Wireless Glass Break Detector |
|
Provides real glass break sounds |
|
Recommended size of glass: 1 x 2 ft or longer; Minimum 1 x 1 ft |
|
Recommended for glass thickness as follows:
• Plate glass: 3/3 to 1/4 in.
• Tempered glass: 1/8 to 1/4 in.
• Laminated glass: 1/8 to 1/4 in.
|
|
|
| |
| |
RPT1 (formerly MG-RPT1)
MAGELLAN Wireless Repeater Module
| Features |
|
Built-in transceiver (433MHz or 868MHz) |
|
Allows to extend the range of wireless communications |
|
Supports all MAGELLAN transmitters |
|
Select which zone, PGM and/or keypad signals are repeated |
|
Signal strength display |
|
Universal transmitter input (N.O./N.C.) |
|
In-field firmware upgrade via 307USB |
|
Wireless range in a typical residential environment:
- 75m (240ft) with 433MHz;
- 50m (160ft) with 868MHz
|
|
AC input (16Vac, 20VA) |
|
Fits in 20cm x 25.5cm x 7.6cm (8in x 10in x 3in) and 28cm x 28cm x 7.6cm (11in x 11in x 3in) metal boxes |
|
Compatible with
MG5000 /
MG5050 /
MG5075 /
RTX3
Note: The RPT1 is not supported by the RTX3 when connected to an EVO panel. |
|
|
| |
| |
2WPGM (formerly MG-2WPGM)
MAGELLAN 2-Way Wireless PGM
| Features |
|
2-way communication allows the 2WPGM to receive commands from MAGELLAN Transceivers and then confirm the command |
|
Backup Alarm Reporting option (activates PGM output if communication between the MAGELLAN All-In-One-Consoles and the 2WPGM is lost) |
|
1 fully programmable 5A relay output |
|
Deactivate PGM after event or timer |
|
Requires an AC or DC input voltage (6Vac to 16.5Vac or 5Vdc to 30Vdc) |
|
Can be powered by the PA12 |
|
Universal transmitter input (N.O./N.C.) |
|
Wireless range in a typical residential environment:
- 35m (115ft) with MG6250;
- 70m (230ft) with MG5000,
MG5050,
and MG5075
|
|
Available in 433MHz or 868MHz |
|
Dimensions: 12.5cm x 4.6cm x 2.5cm (4.9in x 1.8in x 1.0in) |
|
|
| |
PA12
13.8 Vdc Power Adapter Plug
| Features |
|
For use with the 2WPGM Wireless PGM |
|
Provides 13.8 Vdc at 1A maximum |
|
Includes 1 of 5 different power outlets: ACPEU (Europe), ACPAUS (Australia), ACPCH (China), ACPUK (United-Kingdom) and ACPUL (North America) |
|
Wire length: 182.9 cm (6 ft.) |
|
Dimensions: 4.3 x 7 x 5.1 cm (1.7 x 2.8 x 2 in.) |
 |
|
|
|
|
