| Features |
|
Built-in transceiver (433MHz or 868MHz) |
|
100db wireless siren with integrated strobe light |
|
Weather-resistant design using a PC/ABS enclosure with UV protection (-20°C to 50°C / -4°F to 122°F) |
|
Battery powered only, no need for AC power |
|
Wireless range in a typical residential environment:
- 70m (230ft) with
MG5000,
MG5050,
MG5075 and
RTX3
|
|
Fast alarm response time (4 seconds) |
|
2.5 hour alarm display (strobe flashes every 4 seconds after bell cut-off) |
|
Siren presence supervised by control panel |
|
Dual tamper protection (cover removal, and removal from wall) |
|
Assign up to 4 sirens per control panel |
|
In-field firmware upgradeable via 307USB |
|
Siren test mode |
|
4-LED signal strength and status display |
|
Strobe lens available in 4 colours (red, blue, amber, and clear) |
|
Fully powered using three 1.5Vdc type "D" alkaline batteries (included). Not required, but can also be powered using 8-16Vac / 9-20Vdc power supply. |
|
Dimensions: 24cm x 6cm x 18cm (9.5in x 2.3in x 7 in) |
|
Compatible with
MG5000 and
MG5050 V4.0 or higher,
as well as with MG5075.
|
|
Compatible with
Spectra SP series
V4.0 or higher (except SP4000),
EVOHD V1.20 or higher, and
EVO192 V3.20 or higher, when using an
RTX3
V1.5 or higher
|
|
|
