|
|
| |
WD1
Water Detector
| Features |
| • |
Two-way wireless water detector |
| • |
Tamper on bottom of main unit to notify of unintended movement (fix-mounting required) |
| • |
433 / 868 MHz selectable dip switch |
| • |
Blue LED indicator and Piezo |
| • |
3-year battery life |
| • |
Any pair of pins in contact with water triggers detection |
| • |
Can be programmed to shut off electric water valve using a PGM |
| • |
Firmware upgradeable |
| • |
Floor bracket with double-sided tape, no drilling required (included) |
| • |
ES1 Extension Sensor (optional) |
| • |
CE and IP67 |
|
|
| |
| |
ES1
Extension Sensor
| Features |
| • |
Extension Sensor for use with WD1 |
| • |
Does not work as a stand-alone product |
| • |
Plug connection and wire cut both supervised |
| • |
If ES1 is connected to the WD1, the IP67 rating is no longer valid |
|
|
| |
| |
DG457
Glassbreak Bus Detector
| Features |
| • |
Two operational modes (addressable for the Digiplex EVO series or conventional relay operation) |
| • |
Remote test mode when used with Test Trek V2 |
| • |
Full audio and infrasonic spectrum analysis |
| • |
7 frequency digital filters, digital amplifier gain and frequency fluctuation assessment |
| • |
Impact and shock wave analysis |
| • |
High-immunity to RFI and EMI signals |
| • |
Adjustable sensitivity: covers up to 9m (30ft) when set to high and up to 4.5m (15ft) when set to low |
| • |
TestTrek (459) used for testing available separately |
| • |
Anti-tamper switch |
|
|
| |
| |
950
Safe Protector
| Features |
| • |
High-sensitivity piezoelectric element |
| • |
Five sensitivity settings |
| • |
2.5m (8ft) protection range |
| • |
Anti-tamper switch |
|
|
| |
| |
459
Glass Break Sensor Tester (Test Trek)
| Features |
| • |
Produces a test tone to verify the Glass Trek's (DG457) high-audio frequency detection capability |
| • |
Dimensions: 8.2 x 14.3 x 3.8 cm (3.3 x 5.6 x 1.5 in.) |
|
|
| |
| |
SB469
Swivel Mount Bracket
(formerly 469)
| Features |
| • |
For use with 476, 476PET, DG55+, DG65+, DG75+, PMD2P, 525DM, DM50, DM60 and DM70 motion detectors |
| • |
3 in 1: ceiling, wall or corner mount bracket |
| • |
Ensures optimal coverage |
|
|
| |
| |