Multibus automatically switches to RS-485 at 57.6Kbps for bus module firmware upgrade
In-field firmware upgrade for panel and multiple bus modules through the Multibus via local PC or remote IP connection
Support for up to 511 bus modules
Home Automation
Imperial home automation is managed by the MAMA engine using MAMA output modules that control all high or low voltage outputs
and MAMA wall switches. Together these modules offer full control of lights (toggle or dimming of incandescent and fluorescent lights),
motors, shutters (multiple positions, not just fully open or fully closed), sprinklers (any number of valves activate in sequence or in
parallel), and more
Up to 512 MAMA outputs
16 macros per MAMA output module. Each output in the system can be controlled by a macro, which can be a system event, timing,
sunset/sunrise, sensor input, or energy management feature
10,000 home automation events buffered
Access Control
Stand-alone operation with independent RS-485 output port
Up to 64 access control doors
4,000 access cards
Ultra-fast response time
64 access levels
256 schedules
8,000 access control events buffered
Simple 4-wire connections between module, controller and readers
Door trap (man trap) applications
Security
32 partitions
384 zones (8 on-board zones)
250 user codes
2,000 security events buffered
Land line dialer output
Communication
Built-in TCP/IP communication port (10/100Mbps) for upload/download via IP, event reporting to a Paradox IP Monitoring Receiver
(IPR512), or firmware upgrades
Patented 2 optocoupler dialer circuit - the most reliable dialer in the industry (US Patents 5751803, RE39406)
8 simultaneous local/remote BabyWare PC connections
Hardware
DIN rail enclosure with removable terminals for fast, secure, orderly and cost-efficient installations
1.7A built-in switching power supply
Transformer sharing enables modules to share central AC supply (16-24 VAC) or DC supply (18-24 VDC) throughout the system
1 supervised auxiliary output with local control
4 on-board solid-state 100mA PGM outputs (+/- triggering) and 1 NC/NO 5A relay; both PGMs and relay controlled manually or remotely through BabyWare
1 supervised bell/siren output
66MHz, 32-bit processor and 66MHz SDRAM clock
32MB memory on board for ultra fast communication with BabyWare PC software, web page and event storage
Super Capacitor (no battery) for real-time clock backup for up to 10 days (IP auto-clock adjust when available)
Replace a V32 and download a backup from BabyWare in approximately 15 minutes
ZX32D 32 Zone Expansion Module with 2.85A Power Supply
Diagnostic Mode: Zone LEDs turn on/off to identify assigned zone inputs, verify correct wiring (no EOL, EOL without tamper, EOL with tamper) and perform a walk test
In-field firmware upgradeable via bus at high speed (RS-485)
Features 35mm DIN Rail mounting with removable terminals for fast, secure, orderly and economic installations
32 zone inputs
Built-in 1.85A switching power supply
Transformer sharing: modules can share a central AC supply (16 to 24Vac)
Auxiliary outputs providing up to 1A
Button to manually activate/deactivate auxiliary output (illuminates to show status)
32-LED zone status display
6-LED module status display
Fully supervised (AC, battery, low battery and auxiliary limit)
Stand-alone operation via V32�s independent 4-wire RS485 Access port (1000m/3000ft); all data is transferred to the ACM24D to ensure it continues to operate normally even if communication with the control panel is lost
Module processes data locally, which provides ultra fast response time
Connections for 2 doors (2 or 4 card readers, 2 REX devices, 2 door contacts and 2 lock outputs)
SAS mode (one man trap, two-door access)
One reader port supports up to four R910 and/or R915 4-wire card readers (up to 500mA)
4 inputs for 2 REX devices and 2 door contacts
2 lock outputs (6-12Vdc at 1.3A each)
Lock output power jumper (select internal or external power supply)
2 external negative triggers: connect an output or push-button to unlock the door
2.85A switching power supply
Transformer sharing enables modules to share central AC supply (16-24 VAC) or DC supply (18-24 VDC) throughout the system
In-field firmware upgradeable
Simple 4-wire connections between readers, module and panel
DIN rail enclosure with removable terminals
Supports standard 35mm DIN Rail mounting
2 on-board buttons to manually lock or unlock the doors (button illuminates to indicate status)
5-LED module status display
4-LED reader status display
Fully supervised (AC, battery, low battery and overload)
Diagnostic Mode: Zone LEDs turn on/off to identify assigned zone inputs, verify correct wiring (no EOL, EOL without tamper, EOL with tamper) and perform a walk test
LED zone status display
In-field firmware upgradeable via Multibus
Set a different input speed for each zone (up to 255 minutes), which is ideal for temperature monitoring applications
