ZP2M

Expanders

Power Input	12 VDC / 500 mA Min. (Power Pack or M console aux)
Device Input Current	200 mA Max
Power Consumption	2.4 W Max
Bus Connection	M-Bus encrypted RS-485, up to 1,000 ft
Battery	1 x 3.7V Li-ion rechargeable battery, 1000 mAh, 2 hours backup @100 mA aux. (min. 15 mA load required to power Aux)
Aux Output Supply	11V to 13.8V DC, 100 mA
Wireless Type	GFSK two-way with frequency and encryption hopping
RF Frequency	868 (865.05–867.95) MHz or 914 (902.25–927.55) MHz; may vary by region
RF Power	868 MHz: +14 dBm radiated; 914 MHz: +22 dBm (permitted countries)
Number of Inputs	Two fully programmable zones or signaling inputs
Input Connection Type	No EOL, 1EOL or Two EOL (1K ohm)
Number of Outputs	Two relay outputs 30V / 2A, normally open or close, configurable
In Application Status Indication	Zone open/close, Output open/close, tamper status, power available, battery level, temperature, TX/RX values, wireless or Bus connection
Status Indication	Logo: Bus or wireless, online, offline, battery or power operation, upgrade in process, tamper, zone LEDs – open/close, Output Active or not
Transmission Time	Less than 20 ms
Supervision Time	20 minutes, 10 minutes (Default), and 3 minutes
Installation Environment	Indoor
Firmware Upgrade	Remotely via Bus or over-the-air M wireless
Operating Temperature	-20°C to 50°C (-4°F to 122°F)
Battery Charging Temperature	0°C to 40°C (32°F to 104°F)
Humidity	93% maximum (ULC)
Auto Learn	Yes
Colors	White
Dimensions	8.7W x 6.9H x 3D cm (3.4″W x 2.7″H x 1.2″D)
Weight	0.109 kg

No certifications available for this product.